Usually, the Netgear home networking devices are an excellent choice to leverage the benefits of wifi technology. With the extraordinary and advanced networking capabilities of the Netgear extenders, you can enjoy an extended and uninterrupted wifi signal in every nook of your home/office. If you own a Netgear AC1200 range extender and want to make the most of it, this guide is for you. Hereon, you will get all the relevant insights into the Netgear AC1200 WiFi Range Extender Setup process. So, immediately explore the different ways to configure your Netgear repeater!
Step-By-Step Instructions For the Netgear AC1200 WiFi Range Extender Setup
Before you initiate the Netgear AC1200 repeater configuration, you must know the available methods. Generally, there are three ways to set up the Netgear AC1200 range extender, i.e., via web browser, the Nighthawk app, and the WPS button method. If you want to explore How To Setup Netgear AC1200 WiFi Range Extender, then walk through the below sections.
WPS Button Method For the Netgear AC1200 Repeater Setup
- To begin with, check if your extender has the Access Point/Extender switch.
- Then, set your networking device to the ‘Extender’ mode.
- Now, plug your repeater into the power source and place it near the router.
- Further, wait till the extender’s power LED stops pulsing and turns solid green/blue.
- After that, locate and press the WPS button on your extender.
- Now, the WPS LED starts blinking. Now, press the WPS knob on the router within 2 minutes.
- After that, the WPS LED turns solid green or blue.
- Wait till the repeater’s WPS LED turns solid green or blue, indicating that the extender is connected to your network.
- Hereon, unplug and reposition your extender to a new location between the router and dead spots.
- Confirm that all the LEDs stop pulsing before unplugging it.
- Then, plug the range extender back into the power supply and wait for the power and router’s LEDs to turn solid green or blue.
- This will take around 4 minutes. Now, connect your PC or smartphone to the extender’s network.
- Finally, the AC1200 extender setup via the WPS button is completed.
Setting Up the Netgear AC1200 Repeater Via Web Browser
- Initially, make sure your wifi router is connected to the internet.
- Then, switch to ‘Extender’ mode if your range booster has ‘Access Point/Extender’ modes.
- Now, plug in your range extender in the same room as your router.
- After that, wait for the power LED to stop blinking and turn solid green/blue.
- Further, connect your computer to the extender’s wifi network.
- You can either use the ethernet cable connections or the default SSID and password for the internet connection.
- Hereon, open any web browser and type the mywifiext.com web address in the browser bar.
- Then, the Netgear Genie setup wizard appears.
- Hereon, use ‘admin’ as a default username and set up a password for your device.
- Then, set some security questions and tap ‘Next’.
- Hereon, enter the existing network password and hit Next.
- Then, navigate to the Genie dashboard to configure other settings.
- You can change the default SSID, Password, operation mode, Parental controls, Access Controls, etc. settings accordingly.
- At last, the Netgear AC1200 WiFi Range Extender Setup ends here.
How To Setup Netgear AC1200 WiFi Range Extender Via Netgear Nighthawk App?
- Firstly, download the latest version of the Nighthawk app on your smartphone.
- Then, launch the app and tap the ‘Menu’ button from the top-left side of the screen.
- Hereon, choose ‘Set Up A New Nighthawk System’ and tap ‘Get Started’.
- After that, select ‘Range Extender’ and plug it into the power source near your wifi router.
- Now, wait for the power LED to turn solid blue or green.
- Hit ‘Next’ and the ‘Join Nighthawk Network’ page displays.
- Tap on ‘Continue’ and the app tries to make a connection with your extender.
- Now, the ‘Connect Your Device to Nighthawk WiFi’ page appears.
- Hereon hit the ‘Choose Network’ and select the SSID initiating with NETGEAR_EXT.
- Enter the wifi password, return to the app, and tap ‘WiFi is Connected’.
- Then, customize your device settings as per your preferences.
- Follow the in-app instructions for further configuration.
- With this, your extender configuration is finished.
Bottom Line
All in all, this brief guide is an excellent source of information to perform the Netgear AC1200 WiFi Range Extender Setup effortlessly. Through this guide, you have learned different ways to configure your range extender. Hopefully, this source helps you to experience the extended network connectivity within your premises.